Another Big Reactors program from me, this time a monitoring and safety protocol program that will most likely be more useful when meltdowns are implemented. So far it checks if the Reactor is Online, Offline, Storing Power, or needs to be automatically turned on. If you edit it with 'edit <name>' and change au from 0 to 1 then the reactor will turn on if off on the next cycle. If left, it will ignore the automatic turn on and go straight to offline.

To be clear it DOES automatically scan for status every 20 seconds (approx). So it IS automatic. The computer should have left side touching the reactor computer port and the right should be touching a 1 by 4 line of screens (Any type). The PC can be either type as well. Oh, and there's a 5 second screen reading 'updating' in between, a cool little remnant from tick debugging that stayed :)/>

One more thing. The auto on switch (off by default) only activates the reactor automatically if the reactor has no power in the internal buffer, just a heads up :)/>

Pastebin: http://pastebin.com/vRyCNnr5

Thanks for looking :)/>

-Jako

Photos:

Online:


Power Check:


Offline:


Feel free to pretty up both the interface and code, just a little credit might be nice :)/>