This is a read-only snapshot of the ComputerCraft forums, taken in April 2020.
RabidxOtaku's profile picture

3 by 5 stair way creator with stairs

Started by RabidxOtaku, 28 July 2014 - 09:58 PM
RabidxOtaku #1
Posted 28 July 2014 - 11:58 PM
What is this?
3 by 5 stair way creator

Specifics?
  • Creates a 3 by 5 stair way, you pick the length
  • can place torches
  • will refuel if inventory is setup correctly
  • can place stairs
Setup
  1. Slots 1-3 are for stairs of your choosing (you don't have to fill them up, but if there isn't enough stairs to fully complete the stairway, it will not place steps.
  2. Slots 4-5 are for coal(or any other fuel). At a 20 deep staircase, with stairs and torches placed, it only used two pieces of coal, and had 30 power left over!
  3. Slots 6-7 are for torches, again, both don't need to be full just like the others, but I'm not quite sure what happens if you don't have torches, I assume it will just skip that function? Anyways, it places every six or seven blocks, 4 high (reason being, is, even though 3 high looks better in my opinion, it gets in the way of the stairs and torches register as a whole block, which would block stair placing path).
  4. Diagram below and video shall show you how to place miner.
X = Blocks to be mined
O = Turtle starting point.

XXX
XOX
XXX
XXX
XXX

While in a turtle type pastebin get k1iHM9rb Stair note that the last name "Stair" can be what ever you want. Then while in the turtle just type the name and the reset will walk you through it. Also watch the video below for a better how to!

Comment suggestings, comments, grips, groans, random none-sense and bugs below!

Pastebin! - http://pastebin.com/k1iHM9rb

https://www.youtube....eature=youtu.be (how do I embed video :?)
metron80 #2
Posted 01 August 2014 - 02:02 AM
ABCDEFGHIJKLMNOPQRSTUVWXYZ = random nonsense.

Very nice program. I will use this from now on. = comment.