This is a read-only snapshot of the ComputerCraft forums, taken in April 2020.
Darinpsr's profile picture

9X9 Field Builder

Started by Darinpsr, 19 October 2015 - 01:51 PM
Darinpsr #1
Posted 19 October 2015 - 03:51 PM
This is one of my first programs.

The design is to build a farm 9X9 with water in the middle.

Setup:

You need a 13X15 clear, flat area. I used a farming turtle for this project so I can use the same turtle for the farming.

I dug out one layer so the farm will be on ground level. If you are going to clear the land then you need to clear a 13X13 hole with a block dug out two over and one up from the turtle start point. The turtle moves back and right of its start position.

You also have to load the turtle yourself to start. I used full stacks.

slot 1 - Cobble or a material the turtle can not hoe
slot 2 - Cobble or a material the turtle can not hoe
slot 3 - Cobble or a material the turtle can not hoe
slot 4 - Dirt
slot 5 - Dirt
slot 6 - bucket of water
slot 7 - fence or glowstone
slot 8 - 3 chests
slot 9 - seeds
slot 10 - seeds
slot 11 - fuel
slot 12 - fuel
slot 13- fuel

Download: pastebin/DRP1fB Build

Like I said before this my first program.

Upgrades:

- Possible fuel assessment tools
- I am working on the planting and harvest programs.
Darinpsr #2
Posted 20 October 2015 - 12:19 AM
OK I messed up the code somewhere around line 114. I am going to fix that now. I also posted the wrong pastebin name.

pastebin Yiv5ddSm

Sorry for the mistakes. I am learning this as I go.
Waitdev_ #3
Posted 26 October 2015 - 09:38 AM
seems like a cool idea, what are you up to on planting & harvesting? i'm trying to get one turtle to control my base