Posted 21 September 2016 - 12:33 AM
Hi there!
Some time ago I made a Draconic Evolution Reactor stabilizer from the original source code.
http://pastebin.com/4eF2Hrv3
It reacts to status changes of the reactor and adjusts its behaviour accordingly.
Basically it calculates all parameters exactly the same way as the real reactor does and stabilizes the shield / drain accordingly.
As far as I've seen it's only missing an automated shutdown.
Maybe someone wants to add that.
SETUP
Connect the 3 flux gates to control the reactor to modems and connect them to the computer.
The computer needs to be placed near one of the shield stabilizers.
Modify the variables within the script to fit your setup.
Also supports wireless control / information gathering. (Have a look at the "fetch" command)
DISCLAIMER:
I AM NOT RESPONSIBLE FOR MASSIVE DESCTRUCTION CAUSED BY THIS SCRIPT :ph34r:/>
Some time ago I made a Draconic Evolution Reactor stabilizer from the original source code.
http://pastebin.com/4eF2Hrv3
It reacts to status changes of the reactor and adjusts its behaviour accordingly.
Basically it calculates all parameters exactly the same way as the real reactor does and stabilizes the shield / drain accordingly.
As far as I've seen it's only missing an automated shutdown.
Maybe someone wants to add that.
SETUP
Connect the 3 flux gates to control the reactor to modems and connect them to the computer.
The computer needs to be placed near one of the shield stabilizers.
Modify the variables within the script to fit your setup.
Also supports wireless control / information gathering. (Have a look at the "fetch" command)
DISCLAIMER:
I AM NOT RESPONSIBLE FOR MASSIVE DESCTRUCTION CAUSED BY THIS SCRIPT :ph34r:/>