16 posts
somewhere in France
Posted 26 July 2012 - 09:28 AM
I can't understand how ccSensor commands works, can you help me please ?
This is a read-only snapshot of the ComputerCraft forums,
taken in April 2020.
Help me with ccSensor commands !
Started by flighteur, 26 July 2012 - 07:28 AM
16 posts
somewhere in France
Posted 26 July 2012 - 09:02 PM
All, I can't understand their syntax at all and their use.
sorry for my bad english, I'm french.
sorry for my bad english, I'm french.
3790 posts
Lincoln, Nebraska
Posted 26 July 2012 - 09:10 PM
Sounds like the wiki might help better… I'm sure the Pros could fill a book with what they know…Wait! they have!
http://computercraft.info/wiki/index.php?title=CcSensors
http://computercraft.info/wiki/index.php?title=CcSensors
16 posts
somewhere in France
Posted 27 July 2012 - 05:47 AM
the wiki didn't help me at all, it's write exaltly the same text like the ingame help. I wan"t help about console commands, how to use ccSensor with computer.
1243 posts
Indiana, United States
Posted 28 July 2012 - 01:13 PM
I seriously doubt any of the awesome people here (despite being awesome) will waste a few hours writing down all they know about CCSensors because your question was too vague to understand at all. Do you want to know if CCSensors has programs? How to use the APIs? A lot can be accomplished by running
help
16 posts
somewhere in France
Posted 28 July 2012 - 01:32 PM
I know but if you type "help ccSensors" (if I'm right), i got this :
Getting Started:
1. place a Sensor Controller next to a computer
2. open the sensor Controller GUI and hit the "Request new CFreq" button to register a new freq
3. place blank transmitter card in the slot and click "Encode Transmitter"
to get an encoded transmitter to be used with the remote sensor.
4. Place a Remote Sensor (can be placed anywhere) and put the transmitter card in the bottom slot.
(you can rename the Remote Sensor from the default name "Sensor")
5. Place a SensorModule card into the top slot.
6. open the computer terminal and run: /ccSensors/console to run the sample console program.
That's it - you now have a working sensor connected to a computer :)/>/>
I know how to place blocks,computer, etc but I can't use the ccSensors commands in programs or anywhere else, I know i must use lua interpreter to use single pieces of commands and test them, but I didn't found any help at all on internet about the syntax of the commands or their uses or a simple program that demonstrate the commands correctly.
Hope you can read correctly my post and waiting for your help.
Getting Started:
1. place a Sensor Controller next to a computer
2. open the sensor Controller GUI and hit the "Request new CFreq" button to register a new freq
3. place blank transmitter card in the slot and click "Encode Transmitter"
to get an encoded transmitter to be used with the remote sensor.
4. Place a Remote Sensor (can be placed anywhere) and put the transmitter card in the bottom slot.
(you can rename the Remote Sensor from the default name "Sensor")
5. Place a SensorModule card into the top slot.
6. open the computer terminal and run: /ccSensors/console to run the sample console program.
That's it - you now have a working sensor connected to a computer :)/>/>
I know how to place blocks,computer, etc but I can't use the ccSensors commands in programs or anywhere else, I know i must use lua interpreter to use single pieces of commands and test them, but I didn't found any help at all on internet about the syntax of the commands or their uses or a simple program that demonstrate the commands correctly.
Hope you can read correctly my post and waiting for your help.
1243 posts
Indiana, United States
Posted 28 July 2012 - 06:15 PM
I still cannot understand your context, whether you want to know how to use APIs or if there are programs. You basically repeated the OP and added a bit of hope.
2 posts
Texas
Posted 10 August 2012 - 06:39 PM
How do you use the API? I've been looking EVERYWHERE for tutorials, videos and text form. And the ccSensors/console doesn't help AT ALL(I've done what the wiki says to do)